Menü
Inspection automatisée des cordons de soudure
Caractéristiques et paramètres d’inspection pour soudures et irrégularités| Parameters | Defects | Additionals |
|---|
| Weld length | Spatters | Weld position |
| Weld width | Surface pores | Gap (lap weld) |
| Throat thickness | Undercuts | Joint angle |
| Leg length | Holes | Distance |
| Reinforcement | Depressions | Object height |
| Underfill | Burn-throughs | |
| Volume / cross section | Interruptions | |
| Weld toe angle | | |
Vue d’ensemble des différentes plages de mesure du capteur | VICT-10 | VICT-30 | VICT-40 |
|---|
| Working distance | 36.4 mm | 75.7 mm | 145.0 mm |
|---|
| Field of view y | 16.0 mm | 35.3 mm | 40.0 mm |
|---|
| Field of view z | 18.0 mm | 47.4 mm | 72.0 mm |
|---|
| Resolution y | 0.0125 mm | 0.0276 mm | 0.04 mm |
|---|
| Resolution z | 0.0218 mm | 0.048 mm | 0.101 mm |
|---|
- UID:
- Content Type:
- Full Path:
- Params:
- Template: